25 kg fine sand for pool filter (0,4-0,8mm)

The use of washed and sieved sand is absolutely necessary when using a pool filter. The fine sand is charged on top of the filter.

For a filter of 4m3/h : 1 sack
For a filter of 6m3/h : 1,5 sacks
For a filter of 9m3/h : 2 zakken + 1 sacks coarse sand.

2-3 days delivery

We Also Recommend

Distriswim Sandfilter 12m³/h top 6 way valve € 510,00 When do I need a sandfilter ?
A cardridge filter only cleans coarse dirt. When you have algae it will be very difficult to remove these algae with a cardridge filter.

What is a sandfilter?
Water is pushed through a bed of filter sand and removed through a set of lateral tubes at the bottom. Our Sand Pool filters work round-the-clock to filter impurities so you can enjoy pure and clear water.

We can offer you a durable pool sandfilter that will remove even the smallest debris and sediments from your water.

Why ?
A clean pool filter is crucial for maintaining bather comfort and extending the life of pool equipment.

Combination :
- solar heating systems
- inground or upground swimming pools
- a vacuumer that can be assembled to this sandfilter.

Pump and filter fit on a plate like following :
- Pump with flow of 6000 l/h. Also available for other flows
- Topvalve with 6 positions and pressure gauge: Filter – Waste - Rince - Circulation - Backwash - Close
- In and exhaust pipe diameter: both 2 inch and 5 cm (connecting pieces and valves available , only make no part from this offer)
- Filter media : sand or glasspearls

How to start the sandfilter? 1 Put 10L (= 2,6 Gallon) water in the filter. This is absolutely necessary.
2 Put approximately 10 kg (= 22 pound) fine sand (ø 3-5mm) until the distributors inside de filter kettle are totaly covered.
3 Put Carefully approximately 15 kg fine sand (Ø 4-8mm) on the coarse sand.
4. Connect the pump inlet with the outlet (skimmers) of the bath. The pump outlet pipe (above) with the connection "pump" on the filtervalve.

Connect the "Return" on the filtervalve with the return to the swimming pool.

Connect the "Waste" with the sewer.

When you do it really nice will, you put a valve at the inlet of the pump and a valve at the outlet of the filter. (= 2x 12 Euros).

When the diameter of the pooltube = 32 or 38 mm is, have YOU also yet two lapse Ø5cm to 3.2 / 3.8 cm necessarily (= 2 x 2.5 Euros).

You need also glue for flexible tubing (7.5 Euro) necessarily for the sticking of the connections.

5 Put water into the pump house.
6 Connect with the electricity and start up !

When and how do you clean your filter?
IIf the pressure of the filter has risen by 0,3-0.4 bar , it is time to rinse the filter.

How to rinse the pre-filter ?
1 Stop the pump.
2 Put the 6 way valve on "Backwash".
Attention : The water will come out of the "Waste" stream very powerfull
3 Start the pump and let the water stream to the 'waste' during 2-3 minutes.
The sandbed is now cleaned. The water streams upward and the sandbed sets out.
4 Pumps Stop set want to let turn
5 Put the 6 way valve on "Rinsing"
6 Switch the pump on for 30 seconds. The sandbed is now being compressed.
7 De pump stops
6.Put the 6 way valve on 'Filter'

How to rinse the pre-filter ?
1 Stop the pump
2 Close the valve in the pump inlet
3 Close the valve in the oulet of the filter
4 Open the pump and clean the pre-filter.
5 Replace the pre-filter and put water in the filter untill it's ful
6 Open the valve in the pump inlet and the outlet of the filter start immediately after that the pump.

What are the 6 positions for?
Filter = water streams from above to underneath and the dirt remains above on the fine sand.
Waste = empty your pool
Backwash = water streams from below to above and the dirt comes out
Rinse = water streams from above to under and presses the sand together
Circulation = the water doesn't go through the filter, immediately from pump to the pool.
Closed = Everything closed.
Harmo sandfilter + pump 15 m³/h top 6 way valve € 600,00 When do I need a sandfilter ?
A cardridge filter only cleans coarse dirt. When you have algae it will be very difficult to remove these algae with a cardridge filter.

What is a sandfilter?
Water is pushed through a bed of filter sand and removed through a set of lateral tubes at the bottom. Our Sand Pool filters work round-the-clock to filter impurities so you can enjoy pure and clear water.

We can offer you a durable pool sandfilter that will remove even the smallest debris and sediments from your water.

Why ?
A clean pool filter is crucial for maintaining bather comfort and extending the life of pool equipment.

Combination :
- solar heating systems
- inground or upground swimming pools
- a vacuumer that can be assembled to this sandfilter.

Pump and filter fit on a plate like following :
- Pump with flow of 15000 l/h. Also available for other flows
- Topvalve with 6 positions and pressure gauge: Filter – Waste - Rince - Circulation - Backwash - Close
- In and exhaust pipe diameter: both 2 inch and 5 cm (connecting pieces and valves available , only make no part from this offer)
- Filter media : sand or glasspearls

How to start the sandfilter? 1 Put 10L (= 2,6 Gallon) water in the filter. This is absolutely necessary.
2 Put approximately 10 kg (= 22 pound) fine sand (ø 3-5mm) until the distributors inside de filter kettle are totaly covered.
3 Put Carefully approximately 15 kg fine sand (Ø 4-8mm) on the coarse sand.
4. Connect the pump inlet with the outlet (skimmers) of the bath. The pump outlet pipe (above) with the connection "pump" on the filtervalve.

Connect the "Return" on the filtervalve with the return to the swimming pool.

Connect the "Waste" with the sewer.

When you do it really nice will, you put a valve at the inlet of the pump and a valve at the outlet of the filter. (= 2x 12 Euros).

When the diameter of the pooltube = 32 or 38 mm is, have YOU also yet two lapse Ø5cm to 3.2 / 3.8 cm necessarily (= 2 x 2.5 Euros).

You need also glue for flexible tubing (7.5 Euro) necessarily for the sticking of the connections.

5 Put water into the pump house.
6 Connect with the electricity and start up !

When and how do you clean your filter?
IIf the pressure of the filter has risen by 0,3-0.4 bar , it is time to rinse the filter.

How to rinse the pre-filter ?
1 Stop the pump.
2 Put the 6 way valve on "Backwash".
Attention : The water will come out of the "Waste" stream very powerfull
3 Start the pump and let the water stream to the 'waste' during 2-3 minutes.
The sandbed is now cleaned. The water streams upward and the sandbed sets out.
4 Pumps Stop set want to let turn
5 Put the 6 way valve on "Rinsing"
6 Switch the pump on for 30 seconds. The sandbed is now being compressed.
7 De pump stops
6.Put the 6 way valve on 'Filter'

How to rinse the pre-filter ?
1 Stop the pump
2 Close the valve in the pump inlet
3 Close the valve in the oulet of the filter
4 Open the pump and clean the pre-filter.
5 Replace the pre-filter and put water in the filter untill it's ful
6 Open the valve in the pump inlet and the outlet of the filter start immediately after that the pump.

What are the 6 positions for?
Filter = water streams from above to underneath and the dirt remains above on the fine sand.
Waste = empty your pool
Backwash = water streams from below to above and the dirt comes out
Rinse = water streams from above to under and presses the sand together
Circulation = the water doesn't go through the filter, immediately from pump to the pool.
Closed = Everything closed.
Distriswim sandfilter 15 m³/h top 6 way valve € 555,00 When do I need a sandfilter ?
A cardridge filter only cleans coarse dirt. When you have algae it will be very difficult to remove these algae with a cardridge filter.

What is a sandfilter?
Water is pushed through a bed of filter sand and removed through a set of lateral tubes at the bottom. Our Sand Pool filters work round-the-clock to filter impurities so you can enjoy pure and clear water.

We can offer you a durable pool sandfilter that will remove even the smallest debris and sediments from your water.

Why ?
A clean pool filter is crucial for maintaining bather comfort and extending the life of pool equipment.

Combination :
- solar heating systems
- inground or upground swimming pools
- a vacuumer that can be assembled to this sandfilter.

Pump and filter fit on a plate like following :
- Pump with flow of 15000 l/h. Also available for other flows
- Topvalve with 6 positions and pressure gauge: Filter – Waste - Rince - Circulation - Backwash - Close
- In and exhaust pipe diameter: both 2 inch and 5 cm (connecting pieces and valves available , only make no part from this offer)
- Filter media : sand or glasspearls

How to start the sandfilter? 1 Put 10L (= 2,6 Gallon) water in the filter. This is absolutely necessary.
2 Put approximately 10 kg (= 22 pound) fine sand (ø 3-5mm) until the distributors inside de filter kettle are totaly covered.
3 Put Carefully approximately 15 kg fine sand (Ø 4-8mm) on the coarse sand.
4. Connect the pump inlet with the outlet (skimmers) of the bath. The pump outlet pipe (above) with the connection "pump" on the filtervalve.

Connect the "Return" on the filtervalve with the return to the swimming pool.

Connect the "Waste" with the sewer.

When you do it really nice will, you put a valve at the inlet of the pump and a valve at the outlet of the filter. (= 2x 12 Euros).

When the diameter of the pooltube = 32 or 38 mm is, have YOU also yet two lapse Ø5cm to 3.2 / 3.8 cm necessarily (= 2 x 2.5 Euros).

You need also glue for flexible tubing (7.5 Euro) necessarily for the sticking of the connections.

5 Put water into the pump house.
6 Connect with the electricity and start up !

When and how do you clean your filter?
IIf the pressure of the filter has risen by 0,3-0.4 bar , it is time to rinse the filter.

How to rinse the pre-filter ?
1 Stop the pump.
2 Put the 6 way valve on "Backwash".
Attention : The water will come out of the "Waste" stream very powerfull
3 Start the pump and let the water stream to the 'waste' during 2-3 minutes.
The sandbed is now cleaned. The water streams upward and the sandbed sets out.
4 Pumps Stop set want to let turn
5 Put the 6 way valve on "Rinsing"
6 Switch the pump on for 30 seconds. The sandbed is now being compressed.
7 De pump stops
6.Put the 6 way valve on 'Filter'

How to rinse the pre-filter ?
1 Stop the pump
2 Close the valve in the pump inlet
3 Close the valve in the oulet of the filter
4 Open the pump and clean the pre-filter.
5 Replace the pre-filter and put water in the filter untill it's ful
6 Open the valve in the pump inlet and the outlet of the filter start immediately after that the pump.

What are the 6 positions for?
Filter = water streams from above to underneath and the dirt remains above on the fine sand.
Waste = empty your pool
Backwash = water streams from below to above and the dirt comes out
Rinse = water streams from above to under and presses the sand together
Circulation = the water doesn't go through the filter, immediately from pump to the pool.
Closed = Everything closed.
Distriswim sandfilter 20 m³/h top 6 way valve € 930,00 When do I need a sandfilter ?
A cardridge filter only cleans coarse dirt. When you have algae it will be very difficult to remove these algae with a cardridge filter.

What is a sandfilter?
Water is pushed through a bed of filter sand and removed through a set of lateral tubes at the bottom. Our Sand Pool filters work round-the-clock to filter impurities so you can enjoy pure and clear water.

We can offer you a durable pool sandfilter that will remove even the smallest debris and sediments from your water.

Why ?
A clean pool filter is crucial for maintaining bather comfort and extending the life of pool equipment.

Combination :
- solar heating systems
- inground or upground swimming pools
- a vacuumer that can be assembled to this sandfilter.

Pump and filter fit on a plate like following :
- Pump with flow of 15000 l/h. Also available for other flows
- Topvalve with 6 positions and pressure gauge: Filter – Waste - Rince - Circulation - Backwash - Close
- In and exhaust pipe diameter: both 2 inch and 5 cm (connecting pieces and valves available , only make no part from this offer)
- Filter media : sand or glasspearls

How to start the sandfilter? 1 Put 10L (= 2,6 Gallon) water in the filter. This is absolutely necessary.
2 Put approximately 10 kg (= 22 pound) fine sand (ø 3-5mm) until the distributors inside de filter kettle are totaly covered.
3 Put Carefully approximately 15 kg fine sand (Ø 4-8mm) on the coarse sand.
4. Connect the pump inlet with the outlet (skimmers) of the bath. The pump outlet pipe (above) with the connection "pump" on the filtervalve.

Connect the "Return" on the filtervalve with the return to the swimming pool.

Connect the "Waste" with the sewer.

When you do it really nice will, you put a valve at the inlet of the pump and a valve at the outlet of the filter. (= 2x 12 Euros).

When the diameter of the pooltube = 32 or 38 mm is, have YOU also yet two lapse Ø5cm to 3.2 / 3.8 cm necessarily (= 2 x 2.5 Euros).

You need also glue for flexible tubing (7.5 Euro) necessarily for the sticking of the connections.

5 Put water into the pump house.
6 Connect with the electricity and start up !

When and how do you clean your filter?
IIf the pressure of the filter has risen by 0,3-0.4 bar , it is time to rinse the filter.

How to rinse the pre-filter ?
1 Stop the pump.
2 Put the 6 way valve on "Backwash".
Attention : The water will come out of the "Waste" stream very powerfull
3 Start the pump and let the water stream to the 'waste' during 2-3 minutes.
The sandbed is now cleaned. The water streams upward and the sandbed sets out.
4 Pumps Stop set want to let turn
5 Put the 6 way valve on "Rinsing"
6 Switch the pump on for 30 seconds. The sandbed is now being compressed.
7 De pump stops
6.Put the 6 way valve on 'Filter'

How to rinse the pre-filter ?
1 Stop the pump
2 Close the valve in the pump inlet
3 Close the valve in the oulet of the filter
4 Open the pump and clean the pre-filter.
5 Replace the pre-filter and put water in the filter untill it's ful
6 Open the valve in the pump inlet and the outlet of the filter start immediately after that the pump.

What are the 6 positions for?
Filter = water streams from above to underneath and the dirt remains above on the fine sand.
Waste = empty your pool
Backwash = water streams from below to above and the dirt comes out
Rinse = water streams from above to under and presses the sand together
Circulation = the water doesn't go through the filter, immediately from pump to the pool.
Closed = Everything closed.
Distriswim Sandfilter 4m3/h 6 way valve € 280,00 When do I need a sandfilter ?
A cardridge filter only cleans coarse dirt. When you have algae it will be very difficult to remove these algae with a cardridge filter.

What is a sandfilter?
Water is pushed through a bed of filter sand and removed through a set of lateral tubes at the bottom. Our Sand Pool filters work round-the-clock to filter impurities so you can enjoy pure and clear water.

We can offer you a durable pool sandfilter that will remove even the smallest debris and sediments from your water.

Why ?
A clean pool filter is crucial for maintaining bather comfort and extending the life of pool equipment.

Combination :
- solar heating systems
- inground or upground swimming pools
- a vacuumer that can be assembled to this sandfilter.

Pump and filter fit on a plate like following :
- Pump with flow of 4000 l/h. Also available for other flows
- Topvalve with 6 positions and pressure gauge: Filter – Waste - Rince - Circulation - Backwash - Close
- In and exhaust pipe diameter: both 2 inch and 5 cm (connecting pieces and valves available , only make no part from this offer)
- Filter media : sand or glasspearls

How to start the sandfilter? 1 Put 10L (= 2,6 Gallon) water in the filter. This is absolutely necessary.
2 Put approximately 10 kg (= 22 pound) fine sand (ø 3-5mm) until the distributors inside de filter kettle are totaly covered.
3 Put Carefully approximately 15 kg fine sand (Ø 4-8mm) on the coarse sand.
4. Connect the pump inlet with the outlet (skimmers) of the bath. The pump outlet pipe (above) with the connection "pump" on the filtervalve.

Connect the "Return" on the filtervalve with the return to the swimming pool.

Connect the "Waste" with the sewer.

When you do it really nice will, you put a valve at the inlet of the pump and a valve at the outlet of the filter. (= 2x 12 Euros).

When the diameter of the pooltube = 32 or 38 mm is, have YOU also yet two lapse Ø5cm to 3.2 / 3.8 cm necessarily (= 2 x 2.5 Euros).

You need also glue for flexible tubing (7.5 Euro) necessarily for the sticking of the connections.

5 Put water into the pump house.
6 Connect with the electricity and start up !

When and how do you clean your filter?
IIf the pressure of the filter has risen by 0,3-0.4 bar , it is time to rinse the filter.

How to rinse the pre-filter ?
1 Stop the pump.
2 Put the 6 way valve on "Backwash".
Attention : The water will come out of the "Waste" stream very powerfull
3 Start the pump and let the water stream to the 'waste' during 2-3 minutes.
The sandbed is now cleaned. The water streams upward and the sandbed sets out.
4 Pumps Stop set want to let turn
5 Put the 6 way valve on "Rinsing"
6 Switch the pump on for 30 seconds. The sandbed is now being compressed.
7 De pump stops
6.Put the 6 way valve on 'Filter'

How to rinse the pre-filter ?
1 Stop the pump
2 Close the valve in the pump inlet
3 Close the valve in the oulet of the filter
4 Open the pump and clean the pre-filter.
5 Replace the pre-filter and put water in the filter untill it's ful
6 Open the valve in the pump inlet and the outlet of the filter start immediately after that the pump.

What are the 6 positions for?
Filter = water streams from above to underneath and the dirt remains above on the fine sand.
Waste = empty your pool
Backwash = water streams from below to above and the dirt comes out
Rinse = water streams from above to under and presses the sand together
Circulation = the water doesn't go through the filter, immediately from pump to the pool.
Closed = Everything closed.
Distriswim Sandfilter 6m3/h 6 way valve € 330,00 When do I need a sandfilter ?
A cardridge filter only cleans coarse dirt. When you have algae it will be very difficult to remove these algae with a cardridge filter.

What is a sandfilter?
Water is pushed through a bed of filter sand and removed through a set of lateral tubes at the bottom. Our Sand Pool filters work round-the-clock to filter impurities so you can enjoy pure and clear water.

We can offer you a durable pool sandfilter that will remove even the smallest debris and sediments from your water.

Why ?
A clean pool filter is crucial for maintaining bather comfort and extending the life of pool equipment.

Combination :
- solar heating systems
- inground or upground swimming pools
- a vacuumer that can be assembled to this sandfilter.

- Pump with flow of 6000 l/h. Also available for other flows
- Topvalve with 6 positions and pressure gauge: Filter – Waste - Rince - Circulation - Backwash - Close
- In and exhaust pipe diameter: both 2 inch and 5 cm (connecting pieces and valves available , only make no part from this offer)
- Filter media : sand or glasspearls

How to start the sandfilter? 1 Put 10L (= 2,6 Gallon) water in the filter. This is absolutely necessary.
2 Put approximately 10 kg (= 22 pound) fine sand (ø 3-5mm) until the distributors inside de filter kettle are totaly covered.
3 Put Carefully approximately 15 kg fine sand (Ø 4-8mm) on the coarse sand.
4. Connect the pump inlet with the outlet (skimmers) of the bath. The pump outlet pipe (above) with the connection "pump" on the filtervalve.

Connect the "Return" on the filtervalve with the return to the swimming pool.

Connect the "Waste" with the sewer.

When you do it really nice will, you put a valve at the inlet of the pump and a valve at the outlet of the filter. (= 2x 12 Euros).

When the diameter of the pooltube = 32 or 38 mm is, have YOU also yet two lapse Ø5cm to 3.2 / 3.8 cm necessarily (= 2 x 2.5 Euros).

You need also glue for flexible tubing (7.5 Euro) necessarily for the sticking of the connections.

5 Put water into the pump house.
6 Connect with the electricity and start up !

When and how do I need to 'spoelen' my sandfilter ?
IIf the pressure of the filter has risen by 0,3-0.4 bar , it is time to rinse the filter.

How to rinse the pre-filter ?
1 Stop the pump.
2 Put the 6 way valve on "Backwash". Attention : The water will come out of the "Waste" stream very powerfull
3 Start the pump and let the water stream to the 'waste' during 2-3 minutes.
The sandbed is now cleaned. The water streams upward and the sandbed sets out.
4 Pumps Stop set want to let turn
5 Put the 6 way valve on "Rinsing"
6 Switch the pump on for 30 seconds. The sandbed is now being compressed.
7 De pump stops
6.Put the 6 way valve on 'Filter'

How to rinse the pre-filter ?
1 Stop the pump
2 Close the valve in the pump inlet
3 Close the valve in the oulet of the filter
4 Open the pump and clean the pre-filter.
5 Replace the pre-filter and put water in the filter untill it's ful
6 Open the valve in the pump inlet and the outlet of the filter start immediately after that the pump.

What are the 6 positions for?
Filter = water streams from above to underneath and the dirt remains above on the fine sand.
Waste = empty your pool
Backwash = water streams from below to above and the dirt comes out
Rinse = water streams from above to under and presses the sand together
Circulation = the water doesn't go through the filter, immediately from pump to the pool.
Closed = Everything closed.

25 kg fine sand for pool filter (0,4-0,8mm)

Product Reviews

Tell A Friend

Do you have a question about 25 kg fine sand for pool filter (0,4-0,8mm)?